Area Fill Patterning via Plotting and Pattern Libraries
IPLOT software provides the ability to plot areas with user defined area patterns. Through the use of a pattern library and the pen table, the user can select specific patterns to be used on the plots. The pattern library must be attached to the IPARM file (plot parameter file used by the IPLOT software) in order to plot patterns from that library.
The specific pattern is selected by placing a closed shape (ellipse, block, complex shape) on level G-ANNO-PATT-IPLT. The weight and line style of the shape defines the pattern. The pen table searches for shapes on level G-ANNO-PATT-IPLT that are a specific weight and line style, and it assigns an area fill pattern to that shape. The level G-ANNO-PATT-IPLT outline of the shape does not plot. See the "Sample Pattern Library" examples, in this section.
To fill an area with patterning
Verify that IPLOT software is available for plotting, and that the IPLOT configuration files have been edited to include the Facility Drafting pattern libraries.
Place a shape, complex shape, circle, or ellipse on level G-ANNO-PATT-IPLT, and modify the weight and line style to match the desired pattern
The shape will not be visible on the plot.
Click here for pattern samples