All drawings produced for the District shall be created using the seed file provided with the Facility Software. The seed file provides the basic set-up for the design file. Files created without the correct seed file will not be accepted.
The Facility Drafting seed file has been set up with the following parameters. Items shown in BOLD Italic type face should not be altered by the consultant.
|
Working Units |
Master Unit Name: Survey Feet, Label: ' Sub Unit Name: Survey Inch, Label: " Resolution: 96000 per Survey Foot Working units are altered to allow for drafting multiple drawing scales on one drawing. See the section on Drawing Scales, for additional information. |
|
Global Origin |
The global origin is set by the District, and remains constant for all projects. |
|
Level Symbology |
The LEVEL SYMBOLOGY and LEVEL OVERRIDES display should be set to "ON" in all files. A level symbology table has been established to assign colors to specific levels. Actual colors are not used in design files. The level symbology table provides a quick method for checking for correct level use. |
|
Font Library |
stfont.rsc |
|
Fonts used |
Font 2 is the standard font, used for the majority of all text. Fonts 30 and 32 are used in the drawing border only Font 126 is a symbol font used for automatic dimensioning. |
|
Color Table |
stcolor.ctb |
|
Text |
No size set up; will be determined by user based on plot scale. See section on Text, in this manual. |
|
Auto Dimension |
Set Up User Defined Terminators (font 126) Arrowhead = A Diameter = D Origin = O Slash = S |
|
Right Angle Lock |
Off |
|
Data Readout |
Set for master units and subunits |
|
Readout Set To |
4 decimal places |
|
Angle Format |
Conventional Angle, Degrees And Decimals Of A Degree |
|
Unit/Grid |
GU=:.125, GR=8, UR=:.0625 |
|
Locks |
Keypoint Snap On, Inside Fence Lock On |
|
Levels |
ON=ALL - All Views, |
|
Active Level |
default (do not place any elements on the default level) |