Requests for Software
Consultants who have a consulting agreement with the District to provide drawings shall obtain a copy of the Facility Drafting CAD software. The District CAD Contact will provide the consultant with an internet path to download the software .Any questions about this software should be directed to the District CAD Contact. The Consultant may copy the software, as needed, to provide additional copies for sub-consultants.
Software provided to Consultant
The CAD software files are for use with MicroStation V8i format, and includes the following files.
|
Description |
File Name |
|
Project Configuration File |
FACILITY.PCF |
|
Font Resource File |
STFONT.RSC |
|
Color Table for design files |
STCOLOR.CTB |
|
2-D Seed File |
SEED.DGN |
|
3-D Seed File |
SEEDZ.DGN |
|
Unit Definition File |
UNITS.DEF |
|
Custom line styles |
LINES.RSC |
|
Level and Dimensioning Libraries |
*.DGNLIB |
|
Custom Interface (EBMUD menu) |
FAC-INTERFACE.DGNLIB |
|
Settings Files |
SETTINGS.STG, SCALES.STG, UNITS.STG |
|
EBMUD custom applications |
MDL, MVBA, and UCM format |
|
Level conversion spreadsheets (V7 to V8 to V7) |
*.CSV |
|
Cell Libraries: |
|
|
Common cells |
STCOMMON.CEL |
|
Electrical Schematics |
STELEC.CEL |
|
Electrical Physical |
STELECP.CEL |
|
P&ID's |
STPID.CEL |
|
Mechanical cells |
STMECH.CEL |
|
Structural cells |
STSTRUC.CEL |
|
Borders |
STBORDER.CEL |
|
Screen Menu cells |
MISCMENUS.DGN, ELECSCHEM.DGN |
|
IPLOT software custom files |
|
|
IPlot Configuration Files |
ip.cfg, iplot.cfg, iplotsrv.cfg |
|
Settings File - full size plots |
DITHER-FULL.SET |
|
Settings File - half size plots |
DITHER-HALF.SET |
|
Settings File - ExportPDF |
ExportPDF.SET |
|
Color Table for full size plots |
DITHERFULL.CTB |
|
Color Table for half size plots |
DITHERHALF.CTB |
|
Pen Table (full size) |
FULLDITHER.PEN |
|
Pen Table (half size) |
HALF-DITHER.PEN |
|
Pen Table (Export PDF) |
HALF-DITHER-EXPORTPDF.PEN |
|
Pattern Libraries |
STPATT100.PLB STPATT300.PLB STPATT400.PLB STPATT600.PLB |
Other files may be included on a per project basis.
Prototype Drawings
Prototype drawings are drawings that may be used as a model to create design drawings for a specific project. District design projects can be similar to other previously designed projects. When this is the case, prototype drawings may be used by the consultant as a basis for their new drawings.
When using prototype drawings, it is the consultant's responsibility to verify that the CAD standards used in that drawing conform to the standards outlined in this manual. The prototype drawings are provided as a convenience to the consultant. They are not intended as a guideline for CAD standards.
The District will provide the consultant with CAD files of any prototype drawings that may be used for a project. The specific drawings used by each project, if any, will vary. Prototype drawings will be provided in MicroStation format only. Translation to other CAD formats is the responsibility of the consultant.